
The AirTAC SAID32 Double Rod Cylinder SAID32BX350 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 350mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X350 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 350mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding equal push and pull forces of 483N at 0.5 MPa. This through-rod architecture is ideal for mounting a primary workpiece on the front and a position flag or cam on the rear.
This specific configuration uses SUS304 stainless steel (code B) for both rods, offering superior corrosion resistance over standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides, and while no magnet is specified here, adding an -S magnet enables tracking with AirTAC CMSE reed or DMSE electronic solid-state switches.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX350 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer arm where the equal 483N extend and retract forces at 0.7 MPa ensure perfectly balanced acceleration and deceleration of light workpieces.
Powers a vertical lifting slide where the twin SUS304 rods keep the carriage guided and prevent rotational drift without external linear bearings.
Actuates a primary clamping mechanism on the front rod while the protruding rear rod simultaneously trips a mechanical limit valve or sensor flag.
Choose this 32mm bore when an application demands 345N of bidirectional force at 0.5 MPa. If your payload requires less thrust, stepping down is not an option as 32mm is the smallest SAID size, but stepping up to the 40mm bore increases the both-way output to 528N. A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation or require actuation at both ends. Note that a plain SAID does not hold position unpowered; for locking needs, consider SAIL or BSAID variants.
As a dimensionally interchangeable ISO 15552 cylinder, it drops in seamlessly for other double-rod profile cylinders using PT tapered port threads (G1/8) and the standard SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 350mm stroke creates a long unsupported span, the 12mm rod and M10x1.25 thread still require an external guide to prevent rod-bearing bending under heavy side loads.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 profile cylinders, utilizing the PT G1/8 port and standard SAID mounting accessories like FA, LB, or TC brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.