
The AirTAC SAID32 Double Rod Cylinder SAID32BX35S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 35mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X35-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 35mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding equal push and pull forces. This specific bore provides 483 N of thrust and retraction force at 0.7 MPa, ensuring perfectly symmetric motion dynamics.
Equipped with a magnet (-S), this variant supports AirTAC CMSE reed and DMSE electronic solid-state sensors housed within the dual-side extruded barrel grooves. The rods are constructed from corrosion-resistant SUS304 stainless steel (code B), and the fluid ports feature PT tapered threads. The rear rod protrusion allows you to drive a primary workpiece up front while mounting a cam or position flag at the back.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX35S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer arm with identical 483 N force extending and retracting at 0.7 MPa, ensuring consistent acceleration and deceleration without speed drift.
The twin SUS304 rods guide the payload securely against torsional deflection, maintaining precise alignment for delicate pick-and-place tooling.
Mounts the primary workpiece on the front rod end while utilizing the rear protruding rod to trip a mechanical limit switch or operate a secondary mechanism.
Select this 32mm bore when an application demands exactly 345 N of bidirectional force at 0.5 MPa, stepping down from a 40mm bore (528 N) if the load is light, or up if greater thrust is required. A double-rod design is preferred over a single-rod SAI when you need superior anti-rotation guidance or must synchronize two separate mechanisms from one actuator. The standard mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
As a dimensionally interchangeable ISO 15552 profile cylinder, it serves as a direct replacement for other standard double-rod actuators. Note that a plain SAID does not hold its position or lock the load when air pressure is lost; for pneumatic locking requirements, consider the SAIL or BSAID series. The 35mm stroke is well below the side-load bending risk threshold, so external guiding is less critical than on longer strokes.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it shares standard ISO 15552 mounting dimensions, making it a direct replacement for comparable double-rod profile cylinders. It uses PT tapered ports and supports FA, LB, TC, and other standard mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.