
The AirTAC SAID32 Double Rod Cylinder SAID32BX40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 40mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 40mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding equal push and pull forces. This specific configuration outputs 483N of force in both directions at 0.7 MPa.
This unit is built with SUS304 stainless steel rods (option B) for superior corrosion resistance and uses PT tapered port threads. The rear rod end can drive a secondary mechanism or hold a position flag, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX40 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-station shuttle where equal 483N push and pull forces at 0.7 MPa are required to shift components without speed variations between strokes.
Guides a precision vertical slide using both rod ends, preventing mechanical twist and maintaining alignment during compact 40mm clamping operations.
Actuates a workpiece on the front rod while the rear rod protrudes to trigger an external limit switch, maximizing layout efficiency in tight cells.
Select this 32mm bore when an application demands 483N of symmetrical force at 0.7 MPa, and step up to the 40mm bore if you need 739N. A twin-rod design is preferred over a single-rod SAI when you need to mount a cam or sensor flag on the rear end, or require dual-side guidance to prevent the load from rotating. The mounting accessory set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR variants found on single-rod models.
As a standard double-acting cylinder, it does not hold its position if air pressure is lost; use a SAIL or BSAID variant if pneumatic locking is required. This model is dimensionally interchangeable per ISO 15552, uses PT ports, and lacks a magnet (no -S suffix), so position sensing requires adding external switches or selecting a magnet-equipped model.
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X40 is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint as comparable profile cylinders, though it uses PT tapered ports and SUS304 rods.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.