
The AirTAC SAID32 Double Rod Cylinder SAID32BX400 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 400mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X400 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 400mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding equal force and speed in both directions. This model generates 345N each way at 0.5 MPa, ensuring symmetric motion control.
Equipped with SUS304 stainless steel rods (code B), this variant provides enhanced corrosion resistance for demanding environments. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement. Note that the through-rod design extends from the rear cover, requiring additional clearance compared to a standard single-rod SAI cylinder.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX400 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides exactly 345N of force in both extend and retract directions at 0.5 MPa for balanced pushing and pulling operations.
The twin-rod design inherently resists torsional rotation, guiding loads smoothly over the 400mm stroke without external guides.
Mounts a cam or limit flag on the rear rod end to trigger external sensors, keeping the primary work area unobstructed.
Select this 32mm bore model when your application requires identical push and pull forces, such as 345N at 0.5 MPa. If your mechanism needs less force, stepping down is not an option in the SAID range, but stepping up to a 40mm bore yields 528N both ways. The double-rod configuration is ideal for anti-rotation guidance or mounting a secondary cam and position flag on the rear rod. For position sensing, adding the -S magnet option allows the use of AirTAC CMSE reed or DMSE electronic solid-state switches.
With a 400mm stroke, the unsupported rod length increases susceptibility to side-load bending. Use an external guide rail to prevent rod-bearing wear. This cylinder is dimensionally interchangeable per ISO 15552, offering a direct replacement for other ISO 15552 double-rod cylinders. It uses a PT tapered G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mountings. Remember that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so use a SAIL lock or external rod lock for holding.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It outputs 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes. The SAID32X400 is a true ISO 15552 profile cylinder, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses a G1/8 port and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.