
The AirTAC SAID32 Double Rod Cylinder SAID32BX5 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X5 is a double-acting, double-rod ISO 15552 profile cylinder featuring a highly compact 5mm stroke. Because the SUS304 stainless steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding exactly 345N of force each way at 0.5MPa. This symmetric output is ideal for applications requiring perfectly balanced motion.
The twin-rod architecture allows you to mount the primary workpiece on the front rod end while using the rear protrusion for a position flag or secondary cam. It includes adjustable air cushions at both ends to decelerate the piston near stroke limits. Note that this pneumatic cushioning only controls end-of-stroke speed and does not hold the load if air pressure is lost.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX5 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides exactly 345N of force in both directions, ensuring perfectly balanced pushing and pulling for delicate 5mm stamping or clamping operations.
The twin-rod construction naturally resists torsional rotation, guiding small precision payloads securely over the short 5mm travel without external rails.
The protruding rear rod offers a convenient mounting point for a mechanical limit flag or cam, allowing external position verification in compact spaces.
Choose this 32mm bore when an application demands equal push and pull forces within a very tight 5mm stroke envelope. If your mechanism needs less force, stepping down is not an option as 32mm is the smallest SAID size, but stepping up to the 40mm bore increases the both-way output to 528N at 0.5MPa. The double-rod design is selected over a single-rod SAI when dual-side guidance, anti-rotation stability, or rear-rod sensing is required.
This model uses PT tapered ports and a SUS304 rod. It is dimensionally interchangeable per ISO 15552 and uses the standard SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR variants found on single-rod cylinders. For position feedback, note this unit lacks the -S magnet required for AirTAC CMSE reed or DMSE electronic sensors.
Quick checklist
Because it is a double-rod cylinder, the force is identical in both directions. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa for both extending and retracting.
Yes, the SAID32X5 is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses the standard SAID mounting interface set (Basic, FA, LB, TC, FTC, TCM1, TCM2) for direct compatibility.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.