
The AirTAC SAID32 Double Rod Cylinder SAID32BX50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 50mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X50 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 50mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding equal push and pull forces. This generates 345N of thrust and retraction force at 0.5MPa, rising to 621N at 0.9MPa.
Equipped with SUS304 stainless steel rods, this variant offers superior corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that without a magnet, position sensing requires external methods, and the overall length is greater than a single-rod SAI to accommodate the rear rod protrusion.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-sided mechanism where equal push and pull thrust of 483N at 0.7MPa is critical for balanced machine timing.
The twin 12mm rods guide the load against rotation, keeping the workpiece perfectly aligned without external linear bearings.
Mounts the primary tool on the front rod while using the rear protrusion to mechanically trip a remote limit valve.
Select this 32mm bore when an application demands exactly 345N of force in both directions at 0.5MPa, or step up to the 40mm bore for 528N if higher capacity is needed. A twin-rod design is preferred over a single-rod SAI when you need to mount a workpiece on the front rod and a cam or position flag on the rear rod simultaneously. The PT tapered port threads ensure a tight pneumatic seal.
This model uses a 12mm rod with an M10x1.25 thread. For mounting, choose from Basic, FA, LB, TC, FTC, TCM1, or TCM2 (FB, CA, CB, and CR are single-rod only). Remember that the adjustable air cushions only decelerate the piston near stroke ends; they do not hold the load. If position holding without air pressure is required, consider a SAIL or BSAID model.
Quick checklist
Because it is a double-rod cylinder, the extend and retract forces are identical. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa in both directions.
Yes, the SAID32X50 is dimensionally interchangeable per ISO 15552 and uses the standard mounting interface. However, ensure you have rear-rod clearance, as the rod protrudes from both ends.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.