
The AirTAC SAID32 Double Rod Cylinder SAID32BX5S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X5-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 5mm stroke. Because the SUS304 stainless steel rod exits both end covers, the effective piston area is identical in each direction, yielding exactly 345N of force at 0.5 MPa on both extend and retract. The included magnet (-S) enables precise position detection using CMSE reed or DMSE electronic sensors housed in the dual-side barrel grooves.
This short-stroke design is ideal for compact setups requiring twin-side guidance. The PT tapered porting and M10x1.25 rod threads ensure robust pneumatic connections and mounting. With adjustable air cushions at both ends, it safely decelerates the piston near stroke limits without acting as a locking mechanism.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX5S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives small clamps or indexers requiring identical 345N thrust in both directions without speed fluctuations.
Uses the protruding rear rod end to trigger an external limit switch or DMSE sensor for stroke confirmation.
Twin rods guide the payload securely, preventing torsional twist during rapid 5mm clamping cycles.
Choose this 32mm bore when an application demands equal push and pull forces within a tight 5mm stroke, stepping up to the 40mm bore (528N at 0.5 MPa) only if higher thrust is required. A double-rod configuration is preferred over a single-rod SAI when you need to mount a cam or position flag on the rear rod, or when superior anti-rotation stability is critical. As a dimensionally interchangeable ISO 15552 profile cylinder, it drops in seamlessly for other standard double-rod units.
For exact replacement matching, verify the 32mm bore, 5mm stroke, PT port threads, and the -S magnet option. Mounting accessories are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that a plain SAID does not hold position if air pressure is lost; for dead-load holding, consider an external rod lock or the BSAID clamp-lock variant.
Quick checklist
Because the rod occupies both sides of the piston, the force is equal in both directions. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X5-S is a profile cylinder with standard ISO 15552 mounting dimensions, making it dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.