
The AirTAC SAID32 Double Rod Cylinder SAID32BX600 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X600 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 600mm non-standard stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.7 MPa. This through-rod geometry provides superior anti-rotation guidance and allows a secondary mechanism to be driven from the rear.
This configuration uses SUS304 stainless steel rods (code B) for enhanced corrosion resistance, making it suitable for harsher environments. The extruded aluminum barrel includes sensor grooves on both sides, though this specific unit lacks the internal magnet, meaning external physical limit flags must be mounted to the rear rod for position sensing.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX600 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
The twin-rod design inherently resists torsional rotation, providing stable linear movement for precision sliding mechanisms over the long 600mm travel.
Drives loads that require identical push and pull dynamics, utilizing the equal 483N annulus force in both directions for consistent cycling.
Mount the primary workpiece on the front rod and a mechanical cam or physical limit flag on the rear rod to trigger external sensors.
Selecting this non-standard 600mm stroke means the overall physical length extends significantly beyond standard catalog strokes, requiring careful rear-rod clearance in your machine layout. At 600mm, the unsupported stroke length places higher bending moments on the rod bearings; an external guide rail should be used to prevent excessive side loading and premature seal wear. If your application requires position holding when air pressure is lost, note that the standard adjustable air cushions only decelerate the piston at stroke ends and do not act as a lock—consider an external pilot-operated check valve.
When deciding to step up or down, the neighboring 40mm bore offers 528N both ways at 0.5 MPa (versus 345N here), while a smaller bore would struggle with long-stroke sag. This cylinder uses a PT G1/8 port and is dimensionally interchangeable per ISO 15552. Compatible mounting accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR).
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers an equal force of 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X600 is dimensionally interchangeable with other ISO 15552 profile cylinders. You can use it as a direct replacement by matching the 32mm bore, 600mm stroke, G1/8 port, and ISO mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.