
The AirTAC SAID32 Double Rod Cylinder SAID32BX600S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X600-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 600mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483 N of force in both extend and retract directions at 0.5 MPa. This through-rod geometry is ideal for applications requiring symmetric thrust, anti-rotation stability, or a rear-rod extension for cam and position-flag actuation.
This specific configuration includes a SUS304 stainless steel rod (option B) for superior corrosion resistance and a built-in magnet (-S) for use with AirTAC CMSE reed and DMSE electronic sensors. The 600mm stroke is a non-standard made-to-order length exceeding the 32mm bore's 500mm standard maximum. The extruded aluminum barrel integrates sensor grooves on both sides, and the unit uses adjustable air cushions at both ends to decelerate the payload smoothly.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX600S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a shuttle mechanism where the equal 483 N extend and retract forces at 0.5 MPa ensure consistent acceleration and deceleration without requiring pressure adjustments between strokes.
Powers a long-travel vertical lift where the twin-rod architecture prevents the carriage from twisting under offset loads over the extended 600mm travel distance.
Utilizes the protruding rear rod end to physically trip a sequence valve or mechanical limit switch, while the front rod executes the primary 600mm work stroke.
Selecting the SAID32X600-S is optimal when a machine layout demands equal push and pull forces alongside a long 600mm travel. If an application requires less force, stepping down is not possible within the 32mm bore as it is the smallest size; stepping up to a 40mm bore provides 528 N both ways at 0.5 MPa. The double-rod design is chosen over a single-rod SAI when the mechanism needs dual-side guidance to prevent rod twisting, or when a rear-mounted limit flag is required to trigger external CMSE or DMSE sensors.
Because this model features a 600mm stroke, the unsupported rod length is substantial; an external linear guide is strongly recommended to prevent rod-bearing bending and premature seal wear under side loads. For direct replacements, this cylinder is dimensionally interchangeable per ISO 15552 and uses a PT tapered G1/8 port. Available mounting accessories include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). Note that this cylinder does not hold position if air pressure is lost; use a SAIL lock cylinder or external pilot-operated check valve for load-holding.
Quick checklist
Because the rod occupies both sides of the piston, the effective area is equal in both directions. It provides 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extension and retraction.
Yes, the SAID32X600-S is a profile cylinder dimensionally interchangeable per ISO 15552. It shares the same mounting footprint and G1/8 PT port interface, allowing it to serve as a direct replacement for other ISO 15552 double-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.