
The AirTAC SAID32 Double Rod Cylinder SAID32BX650 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 650mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X650 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 650mm non-standard stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract. This yields exactly 483N of force in both directions at 0.7MPa, ensuring perfectly symmetric speed and thrust for demanding transfer tasks.
This specific configuration utilizes a SUS304 stainless steel rod (option B) for superior corrosion resistance. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting. Note that the through-rod design requires extra rear clearance, and this 650mm length is a made-to-order stroke exceeding the 500mm standard maximum for this bore.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX650 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a dual-direction shuttle where equal 483N thrust is required on both the extend and retract strokes to maintain consistent cycle timing.
The twin-rod geometry prevents the load from twisting during the 650mm travel, eliminating the need for a separate anti-rotation guide block.
Mounts a physical cam on the rear rod end to trigger an external mechanical limit switch, keeping the primary front rod clear for tooling.
Select this double-rod cylinder when your mechanism requires equal push and pull forces, or when you need to mount a secondary cam and position flag on the rear rod end while driving a primary load up front. If your application needs less force, stepping down is not an option in this bore size, but stepping up to a 40mm bore provides 528N both ways at 0.5MPa. Remember that a plain SAID32X650 does not hold position when air is lost; for locking requirements, consider an external pilot-operated check valve or the SAIL series.
This model uses PT tapered port threads and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounting accessories. Because the 650mm stroke exceeds the 500mm standard limit, it is manufactured as a non-standard order. At this length, the 12mm rod is highly susceptible to side-load bending; always use an external linear guide to support the workpiece and prevent premature bearing wear.
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa in both directions.
Yes, it is dimensionally interchangeable per ISO 15552 and can serve as a direct replacement for other ISO 15552 double-rod profile cylinders, provided you account for the rear rod protrusion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.