verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX700S

The AirTAC SAID32 Double Rod Cylinder SAID32BX700S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 700mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke700 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$139.52 $152.63Save 8% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX700S

The AirTAC SAID32X700-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483N of force in both extend and retract directions at 0.7 MPa. The integrated -S magnet enables position tracking via CMSE reed or DMSE electronic sensors mounted in the dual-side barrel grooves.

This configuration uses a PT tapered G1/8 port and a 12mm rod. A 700mm stroke means the rear rod protrudes significantly, requiring extra clearance but allowing you to mount a secondary cam, position flag, or second tool on the opposite end for dual-station work.

Airtac SAID32 Double Rod Cylinder SAID32BX700S Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX700S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke700 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX700S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×700Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX700S Is Used

sync_alt

Twin-Station Actuation

Drive two separate mechanisms in perfect synchronization by mounting workpieces on both rod ends, utilizing the equal 483N force output.

straighten

Anti-Rotation Slides

The dual-rod geometry resists torsional twist better than a single-rod cylinder, keeping precision slides aligned over the 700mm travel.

settings_input_component

Through-Rod Sensing

Mount a CMSE or DMSE sensor target on the rear protruding rod to monitor position without interfering with the primary front-side work area.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX700S the Right Cylinder?

Choose this 32mm bore when you need 345N (at 0.5 MPa) of perfectly balanced force both ways, stepping down from a 40mm bore (528N) if the load requires less push/pull and anti-rotation guidance rather than raw power. The double-rod design prevents the twist inherent in single-rod SAI cylinders, keeping the load guided. Note that a plain SAID does not hold position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series.

At 700mm, the unsupported stroke length places bending stress on the 12mm rod bearing. An external linear guide is strongly recommended to prevent side-load wear. It is dimensionally interchangeable per ISO 15552 and uses the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR.

AirtacDistr lists every SAID32 order code with its price on one page at https://airtacdistr.com/products/airtac-said32-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX700S FAQ

Because it is a double-rod cylinder, the effective piston area is the same on both sides. It provides 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.

Yes. The SAID32X700-S shares standard ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod profile cylinders, though it uses the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and excludes FB, CA, CB, and CR.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX700S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID32BX700S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.