verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX70S

The AirTAC SAID32 Double Rod Cylinder SAID32BX70S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 70mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke70 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$72.84 $81.44Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX70S

The AirTAC SAID32X70-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 70mm stroke. Because the piston rod exits both end covers, the effective annulus area is identical on extend and retract, yielding perfectly symmetric force and speed. This configuration outputs 483 N each way at 0.5 MPa and 621 N at 0.9 MPa, eliminating the push-pull disparity found in single-rod units.

Equipped with a magnet (-S) for position sensing, this variant uses SUS304 stainless steel (code B) for both rods to resist corrosion. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount CMSE reed or DMSE electronic switches along the primary stroke while utilizing the rear rod extension for a cam, limit flag, or secondary guidance.

Airtac SAID32 Double Rod Cylinder SAID32BX70S Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX70S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke70 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX70S

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×70Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX70S Is Used

sync_alt

Symmetric Transfer

Drives a workpiece back and forth with identical 483 N force at 0.7 MPa on both strokes, ensuring consistent timing without push-pull calibration.

settings_input_component

Dual-End Tooling

Mounts the primary gripper on the front rod end and a secondary cam or position flag on the rear rod to actuate external limit switches.

straighten

Anti-Rotation Guide

Uses the twin SUS304 rod outputs to guide the load against rotation, maintaining precise alignment for light-duty pick-and-place operations.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX70S the Right Cylinder?

Choose this 32mm bore when an application demands equal force in both directions, such as 345 N at 0.5 MPa, and requires anti-rotation stability or dual-end actuation. If your mechanism needs less force, stepping down is not an option as 32mm is the smallest SAID bore; stepping up to a 40mm bore raises the symmetric output to 528 N at 0.5 MPa. The PT-tapered G1/8 port matches the standard 32mm footprint.

As a true ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders and utilizes a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost. For position holding without live pressure, consider an external rod lock or the BSAID clamp-lock variant.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX70S FAQ

The double-rod design provides equal force in both directions. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.

Yes, it is dimensionally interchangeable per ISO 15552. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits FB, CA, CB, and CR brackets found on single-rod versions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX70S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX70S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.