
The AirTAC SAID32 Double Rod Cylinder SAID32BX75 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X75 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 75mm stroke. Because twin rods exit both end covers, the annulus area is identical on extend and retract, yielding perfectly symmetric force and speed. It generates 345 N of thrust and pull each way at 0.5 MPa.
This specific configuration uses SUS304 stainless steel rods (material code B) for superior corrosion resistance and ships with PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches, while the rear rod end can drive a secondary mechanism or limit flag.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX75 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving payloads between two stations where the 345 N push and pull forces must remain identical, preventing jerk during directional changes.
The twin-rod geometry keeps the load guided and prevents rotation without needing external linear bearings, saving space in compact assemblies.
Mount a primary workpiece on the front rod and a secondary tool or position flag on the rear rod to operate two mechanisms from one cylinder.
Select this 32mm bore when an application demands equal 345 N force in both directions, such as a symmetric transfer or anti-rotation slide. If your mechanism requires less force, stepping down is not an option as 32mm is the smallest SAID bore; however, stepping up to a 40mm bore yields 528 N each way at 0.5 MPa. Choose the double-rod SAID over a single-rod SAI when you need twin-side guidance, rear-rod sensing, or dual-tool actuation.
This cylinder uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding without live air pressure is required, consider an external rod lock or the BSAID clamp-lock series. For direct replacements, verify ISO 15552 mounting dimensions, the PT G1/8 port, and your 75mm stroke requirement.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 345 N in both extend and retract directions at 0.5 MPa, and 621 N both ways at 0.9 MPa.
Yes, the SAID32X75 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 double-rod cylinders, provided your mounting bracket (Basic, FA, LB, TC, etc.) and G1/8 port match.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.