
The AirTAC SAID32 Double Rod Cylinder SAID32BX800 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 800mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X800 is a double-acting, double-rod ISO 15552 profile cylinder featuring an 800mm stroke and 32mm bore. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed in both directions. It generates 345N each way at 0.5 MPa, ensuring perfectly symmetric motion control.
This configuration uses SUS304 stainless steel rods (code B) for superior corrosion resistance and includes PT tapered port threads. The extruded aluminum barrel integrates sensor grooves on both sides for flexible detection. Note that the through-rod design increases the overall length, requiring extra rear clearance compared to a single-rod SAI.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX800 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage with identical 345N push and pull force, maintaining consistent acceleration without speed shifts between stroke ends.
Twin rods guide the payload securely, preventing torsional twist on long 800mm traverses where a single rod would allow unwanted rotation.
The extended rear rod drives a secondary cam or trips a mechanical limit switch independently of the primary front-side workpiece tooling.
Choose this 32mm bore when an application requires 345N of balanced force both ways, or step down if less push is acceptable. A double-rod design is selected over a single-rod SAI when you need dual-side guidance to prevent rotation, or when a rear rod end is required to mount a cam or position flag. The mounting accessory set is limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
At 800mm, this cylinder operates at its maximum standard stroke limit. The long unsupported rod span demands an external guide to prevent rod-bearing bending and excessive side loading. This plain cylinder does not hold position if air pressure is lost; use a SAIL or BSAID for locking needs. It is dimensionally interchangeable per ISO 15552.
Quick checklist
Because the double-rod design has the same effective piston area on both sides, it provides 345N of force in both extend and retract directions at 0.5 MPa, and 621N at 0.9 MPa.
Yes, the SAID32X800 shares standard ISO 15552 mounting dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders, though you must ensure rear clearance for the through-rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.