
The AirTAC SAID32 Double Rod Cylinder SAID32BX80S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 80mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X80-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 80mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding perfectly symmetrical thrust and speed. This design generates 483N of force in both extend and retract directions at 0.5 MPa, eliminating the force differential found in single-rod units.
Equipped with a magnet for position sensing, this model supports AirTAC CMSE reed and DMSE electronic switches mounted into the dual-side sensor grooves on the extruded aluminum barrel. It features SUS304 stainless steel rods for superior corrosion resistance and utilizes PT tapered G1/8 ports. The rear rod extension can drive a secondary mechanism or carry a limit flag, while the mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX80S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the workpiece is mounted on the front rod and a counterweight or sync flag rides the rear rod, ensuring identical 483N force and speed in both directions.
Powers a precision lifting slide where the twin SUS304 rods guide the load against twisting, maintaining strict parallelism without external linear bearings.
Actuates two separate clamping jaws simultaneously from a single piston, using the front and rear rod ends to grip components from opposite sides.
Select this 32mm bore when an application requires equal 483N push and pull forces at 0.5 MPa, stepping down from a 40mm bore (528N) for a compact footprint, or up from a smaller unit if greater thrust is needed. A double-rod architecture is chosen over a single-rod SAI when the mechanism demands dual-side guidance to prevent rotation, or when a rear rod is needed to mount a cam and trigger a secondary sensor. Since the stroke is 80mm, side-load stress on the rod bearing is minimal, but external guides are recommended if absorbing heavy lateral loads.
This cylinder is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. To complete the setup, specify PT port fittings, choose from the SAID mounting accessory set (which omits FB, CA, CB, and CR), and wire CMSE or DMSE sensors to leverage the built-in magnet. Note that the adjustable air cushions only decelerate the piston near stroke end; if the air supply is lost, the cylinder will drift and cannot hold a load without an external pilot-operated check valve or a locking cylinder like the SAIL.
AirtacDistr lists every SAID32 order code with its price on one page at https://airtacdistr.com/products/airtac-said32-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the push and pull forces are equal. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X80-S shares the exact ISO 15552 mounting interface and profile dimensions, making it a direct replacement for other ISO 15552 double-rod cylinders. It uses a G1/8 PT port and supports AirTAC CMSE and DMSE sensors via its integrated magnet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.