
The AirTAC SAID32 Double Rod Cylinder SAID32BX85 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 85mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X85 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 85mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides. This means the cylinder generates exactly 483N of thrust and pull force at 0.7 MPa, ensuring perfectly balanced, symmetric motion. The SUS304 stainless steel rods provide excellent corrosion resistance for demanding environments.
This through-rod design allows you to mount the primary workpiece on the front rod while using the rear extension for external guidance, anti-rotation, or to trigger a position flag. The extruded aluminum barrel includes sensor grooves on both sides, and with a PT tapered port thread, it integrates seamlessly into standard pneumatic setups.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX85 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 85 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×85 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer shuttle where the 483N force must remain identical in both directions, preventing jerky movements during direction reversal.
Uses the twin SUS304 rods to guide a vertical slide, eliminating piston rotation and maintaining precise tool alignment without external guides.
Mounts the workpiece on the front rod while the rear rod extension drives a cam or flag to trigger external limit sensors.
Choose this 32mm bore when an application requires equal push and pull forces—such as 483N at 0.7 MPa—along with dual-side guidance. If your mechanism needs less force, stepping down is not an option in this series, but stepping up to a 40mm bore yields 739N. The double-rod architecture is preferred over a single-rod SAI when you need to prevent rotation or drive a secondary mechanism from the rear rod. To match this cylinder for an ISO 15552 replacement, specify the 32mm bore, 85mm stroke, PT port thread, and your required mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that a plain SAID does not hold position when air pressure is lost; for locking needs, consider the SAIL or BSAID series.
At 85mm, the stroke is compact, but always ensure the rear rod has adequate clearance to protrude without collision. The adjustable air cushions at both ends decelerate the piston near stroke end but do not act as a braking lock.
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It outputs 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both the extend and retract directions.
Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits FB, CA, CB, and CR mounts which are for single-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.