verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX950

The AirTAC SAID32 Double Rod Cylinder SAID32BX950 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke950 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$170.71 $185.92Save 8% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX950

The AirTAC SAID32X950 is a double-acting, double-rod ISO 15552 profile cylinder engineered for symmetric actuation. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 345 N of force each way at 0.5 MPa. This 950 mm stroke is a non-standard, made-to-order length exceeding the 32 mm bore's 1000 mm standard maximum, requiring extra rear-rod clearance.

Beyond equal force, the twin-rod architecture provides superior anti-rotation guidance and allows a position flag or cam to be mounted on the rear rod end. It features PT tapered port threads, adjustable air cushions at both ends, and dual sensor grooves on the extruded aluminum barrel for flexible switch placement.

Airtac SAID32 Double Rod Cylinder SAID32BX950 Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX950
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke950 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX950

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×950Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX950 Is Used

sync_alt

Symmetric Force Transfer

Drives a workpiece from one side while moving a counterweight or secondary tool on the rear rod end, maintaining equal 345 N force and speed in both directions.

straighten

Anti-Rotation Slides

The twin-rod design prevents the piston from twisting during the 950 mm travel, ensuring precise linear tracking for delicate handling tasks.

settings_input_component

Through-Rod Sensing

Mounts a cam or limit flag on the rear SUS304 rod end to trigger external proximity sensors, freeing up the primary front rod for the main workload.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX950 the Right Cylinder?

Select this specific model when an application demands perfectly balanced push and pull forces (345 N at 0.5 MPa) over a long 950 mm travel. If you need higher force, stepping up to the 40 mm bore offers 528 N both ways, but the 32 mm bore is optimal for compact, lighter-duty twin-station drives. Unlike a single-rod SAI, this SAID variant ensures the load stays guided against rotation without external guides for short strokes.

For a 950 mm stroke, the 12 mm rod is highly susceptible to bending under side loads, so an external linear guide is mandatory to prevent rod-bearing damage. This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the standard air cushion only decelerates the piston near stroke end; it does not hold the load. If position holding without live air pressure is required, use a BSAID clamp-lock cylinder or an external rod lock.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX950 FAQ

Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N in both directions at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.

Yes, it is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other ISO 15552 double-rod profile cylinders, utilizing a PT G1/8 port and standard mounting dimensions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX950

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAID32BX950 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.