
The AirTAC SAID32 Double Rod Cylinder SAID32BX950S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 950mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X950-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications demanding equal force and speed in both directions. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on extend and retract, yielding a symmetrical 345N of force at 0.5MPa each way. This 950mm stroke is a non-standard, made-to-order length exceeding the 1000mm standard maximum for this bore, requiring extra rear-rod clearance.
Equipped with a magnet (-S), this variant directly supports AirTAC CMSE reed and DMSE electronic sensors housed within the dual-side extruded barrel grooves. The PT tapered port threads ensure a robust pneumatic seal, while the twin rods provide superior anti-rotation guidance and allow a secondary cam or position flag to be mounted on the rear rod end.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX950S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage where the matching extend and retract speeds prevent jerky transitions, ensuring smooth product handoff between conveyor stations.
Powers a long-stroke vertical slide where the twin SUS304 rods resist torsional twisting better than a single rod, keeping the tool plate perfectly aligned.
Actuates a primary workpiece on the front rod while using the rear rod end to trip a mechanical limit flag or drive a secondary mechanism simultaneously.
Selecting this non-standard 950mm configuration is ideal when a machine layout requires a long reach combined with precise anti-rotation control that a single-rod SAI cannot provide. If your application needs less force, stepping down is not an option below 32mm, but stepping up to a 40mm bore increases the both-way output to 528N at 0.5MPa. For a 950mm stroke, the long unsupported rod span introduces a risk of bending under side loads; always use an external linear guide to support the workpiece.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders, matching standard mounting dimensions. It utilizes the SAID mounting subset (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets. Note that the adjustable air cushions only decelerate the piston near stroke end; this cylinder will drift if air pressure is lost, so add a SAIL lock or external pilot-operated check valve if position holding is required.
Quick checklist
Because it is a double-rod cylinder, the effective piston area is identical in both directions. It provides an equal 345N of force at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa on both extend and retract strokes.
Yes, it is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other standard profile double-rod cylinders. Just ensure you use the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and account for the rear rod protrusion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.