Airtac SAID32 Double Rod Cylinder SAID32X100S
The AirTAC SAID32 Double Rod Cylinder SAID32X100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 100mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke100 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X100S
The AirTAC SAID32X100-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 100mm stroke. Because the piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 483 N of force in both extend and retract directions at 0.5 MPa. The standard carbon steel rod provides durable operation, while the integrated -S magnet enables position detection.
This through-rod configuration is highly effective when you need to mount a workpiece on the front rod and a cam or position flag on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to easily install AirTAC CMSE reed or DMSE electronic switches exactly where needed.
Airtac SAID32 Double Rod Cylinder SAID32X100S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X100S Is Used
Symmetric Force Transfer
Drives a transfer carriage where the 483 N retract and extend forces must be perfectly matched to avoid motor backlash or uneven acceleration.
Dual-Station Actuation
Uses the front rod end to clamp a part while the rear rod end simultaneously triggers a pneumatic limit flag for a secondary process.
Anti-Rotation Guidance
Keeps a light pick-and-place head guided against rotation during vertical movements, leveraging the twin-rod structure for stability.
Is the Airtac SAID32 Double Rod Cylinder SAID32X100S the Right Cylinder?
Select this 32mm bore model when an application requires equal push and pull forces, such as 345 N at 0.5 MPa, alongside dual-side guidance to prevent rotation. If your mechanism demands higher thrust, stepping up to the 40mm bore raises the both-way force to 528 N. Unlike a single-rod SAI cylinder, the SAID32X100-S allows you to actuate a secondary mechanism or sensor target from the rear rod end.
This cylinder uses a PT tapered port thread and operates at speeds of 30-800 mm/s. It is dimensionally interchangeable per ISO 15552 standards. Note that the adjustable air cushions only decelerate the piston near the stroke ends; they do not hold a load if air pressure is lost. For position holding without live pressure, consider an external pilot-operated check valve or the SAIL lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X100S FAQ
Because it is a double-rod cylinder, the push and pull forces are equal. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, the SAID32X100-S is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses the standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and includes a magnet for CMSE/DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.