Airtac SAID32 Double Rod Cylinder SAID32X195S
The AirTAC SAID32 Double Rod Cylinder SAID32X195S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X195S
The AirTAC SAID32X195-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 195mm stroke. Because the twin rods occupy equal piston area on both sides, it outputs 483 N of force in both extend and retract directions at 0.7 MPa. The -S suffix indicates an integrated magnet for position sensing.
A primary advantage of this through-rod design is the ability to mount a workpiece on the front rod extension while utilizing the rear rod for external guidance, anti-rotation, or mounting a secondary cam. The standard carbon steel rods provide durable service, while the extruded aluminum barrel features sensor grooves on both sides compatible with CMSE reed and DMSE electronic switches.
Airtac SAID32 Double Rod Cylinder SAID32X195S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X195S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X195S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X195S Is Used
Symmetric Transfer
Ideal for transferring parts between two stations where identical push and pull speeds are required, ensuring stable motion without asymmetric acceleration profiles.
Anti-Rotation Slides
The twin-rod design naturally resists torsional twist, making it perfect for driving guided slides and preventing platform rotation during vertical strokes.
Dual-Side Actuation
Mount the primary tool on the front rod and a position flag or secondary mechanism on the rear rod end to actuate external limit switches simultaneously.
Is the Airtac SAID32 Double Rod Cylinder SAID32X195S the Right Cylinder?
Select this 32mm bore model when your application requires equal push and pull forces alongside precise anti-rotation guidance. If you need higher force, stepping up to the 40mm bore yields 739 N at 0.7 MPa. If your mechanism only requires single-direction actuation, a standard single-rod SAI cylinder is simpler and shorter. The SAID32X195-S uses PT tapered ports and accepts the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552.
This model includes a magnet for CMSE and DMSE sensors but note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If air pressure drops, the cylinder drifts, requiring an external rod lock or a SAIL/BSAID lock cylinder for position holding. Since the stroke is under 300mm, standard rod bearing bending limits are acceptable without an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X195S FAQ
Because it is a double-rod cylinder, the effective piston area is identical on both sides. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both the extend and retract directions.
Yes, the SAID32X195-S is a profile cylinder dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses standard mounting dimensions and PT port threads, making it a direct replacement for ISO 15552 footprints.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X195S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.