Airtac SAID32 Double Rod Cylinder SAID32X30
The AirTAC SAID32 Double Rod Cylinder SAID32X30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X30
The AirTAC SAID32X30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a compact 30mm stroke. Because a rod extends from both end covers, the annulus area is identical on extend and retract, yielding exactly 345N of force in both directions at 0.5MPa. It is dimensionally interchangeable with other ISO 15552 double-rod cylinders.
This design allows you to mount the primary workpiece on one rod end and a position flag, cam, or second tool on the rear rod end. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches, though this unit ships without a magnet.
Airtac SAID32 Double Rod Cylinder SAID32X30 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X30
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X30 Is Used
Symmetric Force Transfer
Ideal for parts pushing and pulling where the 345N force must be identical in both directions, preventing speed variations between extend and retract strokes.
Anti-Rotation Slides
The twin-rod design keeps the load guided against rotation better than a single rod, making it perfect for precise linear sliding fixtures.
Rear-rod Sensing
The protruding rear rod end can carry a sensor flag or cam to trigger external limit switches without interfering with the primary work area.
Is the Airtac SAID32 Double Rod Cylinder SAID32X30 the Right Cylinder?
Select this 32mm bore model when an application demands equal push and pull forces, or when a secondary mechanism needs rear-rod actuation. If your project requires higher force, stepping up to the 40mm bore provides 528N both ways at 0.5MPa. Unlike the single-rod SAI, the SAID twin-rod design provides superior anti-rotation guidance for the load.
When ordering, match the bore, stroke, PT tapered port, and mounting accessory. The available mounting set is Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles found on single-rod variants. Note that this cylinder does not hold its position if air pressure is lost; for locking requirements, consider the SAIL or BSAID series. The carbon steel rod handles standard side loads well, but external guides are recommended for long unsupported strokes.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X30 FAQ
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 345N at 0.5MPa, 483N at 0.7MPa, and 621N at 0.9MPa.
Yes, it is a profile cylinder dimensionally interchangeable per ISO 15552. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits the FB, CA, CB, and CR styles used on single-rod models.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.