Airtac SAID32 Double Rod Cylinder SAID32X375
The AirTAC SAID32 Double Rod Cylinder SAID32X375 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 375mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke375 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X375
The AirTAC SAID32X375 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32 mm bore and 375 mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 483 N of force in each direction at 0.7 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This design allows you to attach a workpiece on the front rod while using the rear protrusion for a cam, position flag, or secondary mechanism. The standard carbon steel rod provides durable service, and adjustable air cushions at both ends (27 mm cushion length) ensure smooth deceleration across the 30-800 mm/s speed range.
Airtac SAID32 Double Rod Cylinder SAID32X375 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X375 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 375 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X375
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×375 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X375 Is Used
Symmetric Force Transfer
Ideal for mechanisms requiring identical push and pull dynamics, utilizing the 483 N both-way force to move loads consistently without speed disparities.
Anti-Rotation Slides
The twin-rod configuration keeps the workpiece guided against rotation, preventing binding in precision sliding fixtures over the 375 mm travel.
Twin-Station Actuation
Mount a primary tool on the front rod and a secondary cam or flag on the rear rod to drive two synchronized stations from one pneumatic source.
Is the Airtac SAID32 Double Rod Cylinder SAID32X375 the Right Cylinder?
Choose this 32 mm bore double-rod cylinder when an application demands equal push and pull forces alongside anti-rotation guidance. If your mechanism requires less force, dropping down is not an option since 32 mm is the smallest ISO 15552 bore in this series; stepping up to a 40 mm bore provides 528 N each way at 0.5 MPa. Since this model lacks the -S magnet suffix, it cannot host CMSE or DMSE sensors directly.
At a 375 mm stroke, the unsupported rod length increases the risk of side-load bending on the rod bearings; always use an external guide rail for heavy or off-center loads. Note that a plain SAID does not hold position when air pressure is lost—use a SAIL or BSAID variant if mid-stroke locking is required. This cylinder is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) with PT threaded ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X375 FAQ
Because the double-rod design subtracts the rod area on both sides, the push and pull forces are equal. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa in both directions.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. However, the SAID series uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X375
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.