Airtac SAID32 Double Rod Cylinder SAID32X5
The AirTAC SAID32 Double Rod Cylinder SAID32X5 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 5mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke5 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X5
The AirTAC SAID32X5 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and a 5mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 345 N of force in both directions at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting.
This compact through-rod design allows you to mount a workpiece on the front rod end and a position flag or cam on the rear, providing dual-side guidance and superior anti-rotation resistance. The standard carbon steel rod and PT tapered port threads ensure robust performance, while adjustable air cushions at both ends decelerate the piston smoothly.
Airtac SAID32 Double Rod Cylinder SAID32X5 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X5 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X5
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X5 Is Used
Symmetric Force Transfer
Ideal for short-stroke pressing or clamping where the 345 N push and pull forces must be exactly equal, ensuring consistent dual-directional work.
Anti-Rotation Slides
The twin through-rods prevent the piston from twisting, making it perfect for guiding small precision slides or pick-and-place nozzles without external guides.
Rear-Rod Sensing
Mount the primary tool on the front rod and a position flag on the rear protruding rod to trigger rear-mounted CMSE or DMSE sensors in tight spaces.
Is the Airtac SAID32 Double Rod Cylinder SAID32X5 the Right Cylinder?
Choose the SAID32X5 when an application demands perfectly symmetric force and speed over a very short 5mm travel, or when a rear rod is needed to actuate a secondary mechanism. If your design requires higher thrust, stepping up to the 40mm bore yields 528 N each way at 0.5 MPa. Unlike a single-rod SAI cylinder, this double-rod configuration inherently resists torsional loads.
For dimensionally interchangeable direct replacements per ISO 15552, match the 32mm bore, 5mm stroke, PT port, and mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the FB, CA, CB, and CR mounts are omitted. Since this is a standard double-acting cylinder, it will not hold a load if air pressure is lost; for position holding, consider an external pilot-operated check valve or the SAIL lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X5 FAQ
Because the double-rod design occupies piston area on both sides, the effective annulus area is equal in both directions. The output force is 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X5 is dimensionally interchangeable per ISO 15552. It uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR styles found on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.