Airtac SAID32 Double Rod Cylinder SAID32X500S
The AirTAC Airtac SAID32 Double Rod Cylinder SAID32X500S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 500mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke500 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X500S
The AirTAC SAID32X500-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 500mm stroke. Because the twin rods occupy both sides of the piston, the annulus area is identical in each direction, yielding an equal extend and retract force of 483N at 0.7 MPa. The included magnet (-S) directly supports AirTAC CMSE reed and DMSE electronic solid-state sensors.
This through-rod design allows you to mount the primary workpiece on the front end while attaching a position flag, cam, or secondary mechanism to the rear rod. It uses a carbon steel rod and PT tapered port threads, maintaining a dimensionally interchangeable ISO 15552 mounting footprint for direct compatibility.
Airtac SAID32 Double Rod Cylinder SAID32X500S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X500S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X500S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X500S Is Used
Symmetric Transfer
Drives a transfer carriage with equal push and pull velocity, ensuring precise timing for parts moving between machining stations.
Anti-Rotation Slides
The twin-rod geometry resists torsional twisting under offset loads, keeping linear slides perfectly aligned without external rails.
Rear-Sensor Actuation
Mounts the tooling on the front rod while using the rear rod protrusion to trigger DMSE electronic sensors for a compact feedback loop.
Is the Airtac SAID32 Double Rod Cylinder SAID32X500S the Right Cylinder?
Select this 32mm bore when an application requires symmetric force and dual-side guidance rather than the uneven push/pull of a single-rod SAI. If you need less force, stepping down is not an option below 32mm in this series, but stepping up to the 40mm bore provides 739N both ways. For this 500mm stroke, the long unsupported length means side loads will induce rod-bearing bending; always use an external guide to prevent premature seal wear.
As a standard double-acting cylinder, the air cushions only decelerate the piston near stroke end and do not hold the load if air pressure is lost. For position holding without live pressure, consider an external pilot-operated check valve or the BSAID clamp-lock variant. To match this unit for an ISO 15552 replacement, specify the 32mm bore, 500mm stroke, G1/8 port, PT threads, and your required mounting accessory from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X500S FAQ
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It generates an equal force of 345N at 0.5 MPa and 483N at 0.7 MPa in both the extend and retract directions.
Yes, it is dimensionally interchangeable with standard ISO 15552 profile cylinders. It supports a specific subset of mounts including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits the FB, CA, CB, and CR styles used on single-rod variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X500S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.