Airtac SAID32 Double Rod Cylinder SAID32X60
The AirTAC SAID32 Double Rod Cylinder SAID32X60 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X60
The AirTAC SAID32X60 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 60mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 345 N of force in both extend and retract directions at 0.5 MPa. The PT-tapered G1/8 port and 12mm carbon steel rod provide robust performance for compact dual-motion tasks.
This through-rod design allows you to mount the primary workpiece on one end and a position flag or cam on the rear rod end. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches, though this specific unit lacks the internal magnet required for them.
Airtac SAID32 Double Rod Cylinder SAID32X60 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X60 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X60
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X60 Is Used
Symmetric Force Transfer
Ideal for mechanisms requiring equal push and pull forces, utilizing the 345 N both-way thrust to drive symmetric clamping or transfer arms without force imbalance.
Anti-Rotation Slides
The twin-rod design prevents piston rotation, providing precise linear guidance for sliding gates or tooling platforms that cannot twist during movement.
Through-Rod Sensing
The rear rod end can drive a secondary mechanism or carry a position flag, allowing external limit sensors to track the full stroke independently of the front tool.
Is the Airtac SAID32 Double Rod Cylinder SAID32X60 the Right Cylinder?
Choose the SAID32X60 when your mechanism requires equal push and pull forces, anti-rotation guidance, or rear-rod position sensing that a single-rod SAI cannot provide. If you need higher thrust, stepping up to the 40mm bore offers 528 N both ways at 0.5 MPa. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standard profile double-rod cylinders.
When ordering, confirm the 60mm stroke, G1/8 PT port, and your preferred mounting accessories from the SAID subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable air cushions only decelerate the piston near stroke end; a plain SAID will drift and does not hold a load if air pressure is lost. For position holding without live pressure, consider an external rod lock or the SAIL/BSAID series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X60 FAQ
The SAID32X60 provides exactly 345 N of force at 0.5 MPa and 483 N at 0.7 MPa. Because it is a double-rod cylinder, this force is identical in both the extend and retract directions.
No, the SAID32X60 is a standard double-acting cylinder and will drift if air is exhausted. The adjustable air cushions only decelerate the piston at stroke end; they do not lock or hold the load. For position holding, an external rod lock or the SAIL series is required.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.