Airtac SAID32 Double Rod Cylinder SAID32X60S
The AirTAC SAID32 Double Rod Cylinder SAID32X60S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X60S
The AirTAC SAID32X60-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 60mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding exactly 483 N of force both ways at 0.7 MPa. The extruded aluminum barrel includes dual sensor grooves, and the integrated -S magnet works seamlessly with AirTAC CMSE reed and DMSE solid-state switches for precise position detection.
This through-rod design allows you to mount the primary workpiece on one end while attaching a position flag, cam, or secondary tool to the rear rod, providing excellent anti-rotation guidance. It uses a 12mm carbon steel rod with an M10x1.25 thread and a PT G1/8 port. The mounting hardware covers Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting the FB, CA, CB, and CR variants used on single-rod units.
Airtac SAID32 Double Rod Cylinder SAID32X60S Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X60S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X60S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X60S Is Used
Twin-Station Actuation
Drive two separate mechanisms simultaneously from one cylinder, using the front rod for the primary workpiece and the rear rod for a secondary synchronized action.
Anti-Rotation Slides
Leverage the dual-sided through-rod guidance to prevent mechanical drift and twisting in precision sliding fixtures that require strict angular stability.
Through-Rod Sensing
Mount a position flag or cam on the rear rod end to trigger external proximity sensors, keeping the primary work area clear of obstructions.
Is the Airtac SAID32 Double Rod Cylinder SAID32X60S the Right Cylinder?
Select this 32mm bore when your application requires 483 N of symmetric force both ways at 0.7 MPa, or step up to the 40mm bore if you need 739 N. The double-rod architecture is chosen over a single-rod SAI when the mechanism demands dual-side guidance, anti-rotation stability, or rear-rod actuation. The adjustable air cushions at both ends decelerate the piston smoothly near stroke end, but note that a plain SAID does not hold a load if air pressure is lost; for dead-air holding, use an SAIL lock or BSAID clamp-lock cylinder.
To match this ISO 15552 footprint, specify the 60mm stroke, the PT G1/8 port, and the -S magnet option for CMSE/DMSE sensor compatibility. Since the rear rod protrudes from the back cover, ensure you leave adequate clearance in your machine layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X60S FAQ
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa for both extend and retract strokes.
Yes, the SAID32X60-S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting interface and can replace other ISO 15552 profile cylinders, but note it uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and excludes FB, CA, CB, and CR variants.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.