Airtac SAID32 Double Rod Cylinder SAID32X65
The AirTAC SAID32 Double Rod Cylinder SAID32X65 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke65 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID32 Double Rod Cylinder SAID32X65
The AirTAC SAID32X65 is a double-acting, double-rod pneumatic cylinder built to ISO 15552 profile standards. Because a carbon steel rod exits both ends of the extruded aluminum barrel, the annulus area is identical on extend and retract, yielding an equal 345 N of force in each direction at 0.5 MPa. This 65 mm stroke is a non-standard, made-to-order length that requires extra rear-rod clearance for the protruding shaft.
This design allows you to mount a workpiece on the front rod end and a position flag or cam on the rear, providing dual-side guidance and superior anti-rotation resistance compared to a single-rod SAI. It features adjustable air cushions at both ends (27 mm cushion stroke) and dual sensor grooves for CMSE reed and DMSE solid-state switches.
Airtac SAID32 Double Rod Cylinder SAID32X65 Technical Specifications
| Model | Airtac SAID32 Double Rod Cylinder SAID32X65 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID32 Double Rod Cylinder SAID32X65
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID32 Double Rod Cylinder SAID32X65 Is Used
Symmetric Transfer
Drives a transfer arm where the equal 345 N force on both extend and retract ensures consistent speed and torque during part handoff.
Anti-Rotation Slide
Powers a precision slide where the twin-rod design prevents the load from twisting, keeping the tooling perfectly aligned.
Rear-Cam Actuation
Mounts a cam on the rear rod end to trigger a mechanical valve or limit switch while the front rod performs the primary work.
Is the Airtac SAID32 Double Rod Cylinder SAID32X65 the Right Cylinder?
Select this 32 mm bore when you need symmetric push-pull dynamics in a compact ISO 15552 footprint; if your application requires less force, there is no smaller bore in this series, but stepping up to the 40 mm bore increases the both-way output to 528 N at 0.5 MPa. The PT tapered port thread (G1/8) matches the standard 32 mm bore sizing. Choose the double-rod SAID over a single-rod SAI when your mechanism requires a rear-mounted sensor flag, twin-station actuation, or strict anti-rotation control.
This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR brackets found on single-rod variants. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your system loses air pressure, the piston will drift, requiring an external rod lock or a SAIL/BSAID locking cylinder for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID32 Double Rod Cylinder SAID32X65 FAQ
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It delivers 345 N in both directions at 0.5 MPa, 483 N at 0.7 MPa, and 621 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, but omits the FB, CA, CB, and CR brackets used on single-rod versions.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32X65
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.