Airtac SAID50 Double Rod Cylinder SAID50AX90
The AirTAC Airtac SAID50 Double Rod Cylinder SAID50AX90 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø50mm bore and 90mm stroke, G1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ50 mm
- Stroke90 mm
- Port sizeG1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SAID50 Double Rod Cylinder SAID50AX90
The AirTAC SAID50X90 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm bore and 90 mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding an equal extend and retract force of 825 N at 0.5 MPa. This symmetric output is ideal for applications requiring consistent push and pull dynamics.
This variant utilizes a SUS420J2 stainless steel rod for enhanced corrosion resistance and includes dual-side sensor grooves for flexible mounting. The rear rod end can drive a secondary mechanism or position flag, while the adjustable air cushions at both ends absorb impact. Note that the through-rod design requires extra rear clearance compared to a single-rod SAI cylinder.
Airtac SAID50 Double Rod Cylinder SAID50AX90 Technical Specifications
| Model | Airtac SAID50 Double Rod Cylinder SAID50AX90 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | G1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAID50 Double Rod Cylinder SAID50AX90
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 50 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAID50 Double Rod Cylinder SAID50AX90 Is Used
Symmetric Force Transfer
Provides identical 825 N push and pull forces at 0.5 MPa, ensuring perfectly balanced actuation for material handling presses and clamping mechanisms.
Anti-Rotation Slides
The twin-rod design inherently resists torsional rotation, guiding external loads with high precision without needing external guide rails.
Through-Rod Sensing
Allows a position flag or cam to be mounted on the rear rod end to trigger external sensors, keeping the primary work area unobstructed.
Is the Airtac SAID50 Double Rod Cylinder SAID50AX90 the Right Cylinder?
Select this 50 mm bore when an application demands equal 825 N force in both directions, or step down to a 40 mm bore for 528 N if payload requirements are lighter. The double-rod configuration is chosen over a single-rod SAI when twin-station actuation, anti-rotation guidance, or rear-rod sensing is required. It uses a PT tapered port (G1/4) and supports mountings Basic, FA, LB, TC, FTC, TCM1, and TCM2.
This cylinder does not hold its load when air pressure is lost; the piston will drift if the valve is centered or exhausted. For position holding without live pressure, consider a SAIL (air-released lock) or BSAID (clamp-lock) variant. Dimensionally interchangeable per ISO 15552, it serves as a drop-in replacement for other standard double-rod cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAID50 Double Rod Cylinder SAID50AX90 FAQ
Because the double-rod design subtracts the rod area on both sides, the extend and retract forces are equal. The SAID50X90 outputs 825 N both ways at 0.5 MPa, and 1154 N both ways at 0.7 MPa.
Yes, the SAID50X90 is dimensionally interchangeable per ISO 15552 and serves as a drop-in replacement for other standard profile double-rod cylinders, utilizing a PT G1/4 port and standard mounting interfaces.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SAID50 Double Rod Cylinder SAID50AX90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.