
The AirTAC SAID63 Double Rod Cylinder SAID63AX100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 100mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X100-S is a double-acting, double-rod ISO 15552 profile cylinder engineered to deliver identical thrust and velocity in both directions. Because the piston rod passes through both end covers, the annulus area is balanced, yielding a consistent 1402 N of force during both extend and retract strokes at 0.5 MPa. Equipped from the factory with a -S magnet, it integrates seamlessly with AirTAC CMSE reed and DMSE solid-state sensors housed in the dual-side barrel grooves.
This specific configuration features a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and PT tapered port threads. The twin-rod architecture provides exceptional anti-rotation guidance, allowing you to mount a primary workpiece on the front rod and a secondary cam or position flag on the rear rod to actuate external mechanisms.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pressing or stamping stations where the 1402 N retraction force must equal the extension force, ensuring consistent material handling without force spikes.
The dual-rod design prevents piston twist, making it perfect for lifting heavy guided carriages or vertical doors that require strict mechanical stability.
Mount the primary tool on the front rod and a mechanical cam or position flag on the rear rod to trigger external limit switches or secondary mechanisms simultaneously.
Choose this 63 mm bore when an application demands symmetric force and inherent anti-rotation properties that a single-rod SAI cannot provide. If your project requires less force, stepping down to the 50 mm bore yields 825 N both ways at 0.5 MPa; conversely, the 80 mm bore provides 2268 N if your payload is heavier. Remember that a plain double-rod cylinder relies on live air pressure to maintain position; if power drops, the piston drifts. For failsafe load holding without air, consider an external rod lock or the SAIL series.
For a direct replacement, this cylinder is dimensionally interchangeable with other ISO 15552 twin-rod actuators. Ensure you specify the PT port thread, the -S magnet option for dual-side sensor grooves, and select from the SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), which intentionally omits the FB, CA, CB, and CR brackets used on single-rod variants.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the rod occupies both sides of the piston, the effective area is identical in both directions. It provides 1402 N of force at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.
Yes, it is dimensionally interchangeable with ISO 15552 cylinders. However, SAID uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and does not support the FB, CA, CB, or CR brackets found on single-rod versions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.