
The AirTAC SAID63 Double Rod Cylinder SAID63AX105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 105mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X105 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 105mm non-standard stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of output force at 0.5 MPa in both extend and retract directions.
This unit is configured with SUS420J2 stainless steel rods (material code A) for enhanced corrosion resistance and uses PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE solid-state switches.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX105 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving loads between two stations where the 1402 N push and pull forces must remain perfectly balanced throughout the entire travel cycle.
The dual-rod architecture prevents piston rotation, providing precise linear guidance for machining fixtures without needing external guide rails.
The protruding rear rod drives a secondary mechanism or limit flag, allowing designers to sequence external valves or sensors from the back end.
Choose this non-standard 105mm stroke when a specific spatial constraint prevents using the 100mm or 125mm standard options. If your application requires less force, the 50mm bore neighbor provides 825 N at 0.5 MPa; if you need more power, the 80mm bore offers 2268 N. The twin-rod design is selected over a single-rod SAI when the mechanism demands superior anti-rotation guidance, dual-side work mounting, or a rear-rod position flag.
This SAID63X105 uses a G3/8 port and accepts mounting accessories Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If your system loses air pressure, the cylinder will drift, requiring an external rod lock or a SAIL/BSAID variant for position holding.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa in both directions.
Yes, the SAID63X105 is dimensionally interchangeable with other ISO 15552 double-rod profile cylinders. It uses the standard ISO mounting interface and a G3/8 port, though it is uniquely made-to-order with a 105mm non-standard stroke.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.