
The AirTAC SAID63 Double Rod Cylinder SAID63AX110S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X110-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 110mm stroke. Because a piston rod exits both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. The extruded aluminum barrel incorporates sensor grooves on both sides for flexible switch mounting.
Equipped with a magnet for position detection, this variant uses SUS420J2 stainless steel rods (material code A) for enhanced durability against corrosion and surface wear. The rear rod extension is ideal for mounting a cam, position flag, or secondary mechanism, providing superior anti-rotation guidance compared to a single-rod SAI cylinder.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX110S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a workpiece back and forth with identical 1402N force and speed in both directions, ensuring consistent cycle times for pressing or stamping operations.
Uses the protruding rear rod end to trigger a mechanical limit valve or cam, while the front rod handles the primary tooling load.
Leverages the twin-rod guidance to prevent mechanical twisting and deflection in precision lifting and sliding jigs.
Choose this 63mm bore double-rod cylinder when an application demands equal push and pull forces (1402 N at 0.5 MPa) and high torsional stability. If you need less force, the 50mm bore offers 825 N; if you need more, the 80mm bore provides 2268 N. The double-rod design inherently resists side-load rotation better than a single-rod SAI, though for heavy radial loads an external guide is still recommended. This model uses a PT tapered G3/8 port and accepts the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR accessories.
Note that a plain SAID cylinder does not hold its load when air pressure is removed or exhausted; the piston will drift. If your application requires true position holding without live pressure, consider an AirTAC SAIL (pneumatic lock) or BSAID (clamp-lock) cylinder instead. The adjustable air cushions at both ends only decelerate the piston near stroke end and do not function as a brake.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is identical in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, the SAID63X110-S is dimensionally interchangeable per ISO 15552 profile cylinder standards. It serves as a direct replacement for other ISO 15552 double-rod cylinders, provided you account for the rear rod protrusion clearance.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.