verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX145

The AirTAC SAID63 Double Rod Cylinder SAID63AX145 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 145mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke145 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$143.73 $151.23Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX145

The AirTAC SAID63X145 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 145mm stroke. Because a rod exits both end covers, the annulus area is identical on both sides, yielding equal extend and retract forces of 1402N at 0.5MPa. This through-rod configuration uses a PT tapered port thread and a SUS420J2 stainless steel rod for enhanced corrosion resistance.

The twin-rod architecture allows you to mount the primary workpiece on one end while utilizing the rear rod end for external guidance, anti-rotation control, or mounting a secondary cam. As a non-standard 145mm stroke, it is manufactured to order while retaining full ISO 15552 mounting interface compatibility for direct interchangeability.

Airtac SAID63 Double Rod Cylinder SAID63AX145 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX145
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke145 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX145

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×145Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX145 Is Used

sync_alt

Symmetric Force Transfer

Provides identical 1402N push and pull forces at 0.5 MPa, ideal for machinery requiring perfectly balanced bidirectional actuation without pressure compensation.

straighten

Anti-Rotation Slides

The dual-rod design prevents piston rotation during travel, ensuring precise linear guidance for heavy sliding mechanisms in assembly lines.

settings_input_component

Through-Rod Sensing

Allows a position flag or cam to be mounted on the rear rod end to trigger external mechanical switches or physical stops independently of the front tooling.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX145 the Right Cylinder?

Select this specific 63mm bore model when an application requires balanced bidirectional force (1402N at 0.5MPa) and superior anti-rotation guidance that a single-rod SAI cannot provide. If you need higher thrust, stepping up to the 80mm bore yields 2268N both ways; stepping down to the 50mm bore offers 825N. The 145mm stroke is a non-standard made-to-order dimension.

Ensure your layout accommodates the extra rear-rod protrusion clearance. Remember that a plain SAID does not hold a load when air pressure is lost; for position holding, consider an external pilot-operated check valve or the SAIL lock variant. Mounting accessories are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, CR).

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX145 FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the output force is equal in both directions. It provides 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa.

Yes, it is dimensionally interchangeable per ISO 15552 profile cylinder standards. It supports a reduced set of mounts including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX145

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX145 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.