
The AirTAC SAID63 Double Rod Cylinder SAID63AX15 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 15mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X15 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 15mm stroke. Because a rod exits both ends, the annulus area is identical on extend and retract, yielding an equal force of 1402 N each way at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of position switches.
Configured with SUS420J2 stainless steel rods (material code A) and PT tapered port threads, this variant is built for demanding environments. The twin rods provide superior anti-rotation guidance and allow mounting a secondary mechanism or position flag on the rear rod end.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX15 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides identical push and pull forces for mechanisms requiring perfectly balanced kinetic energy in both directions.
The twin rods prevent piston twisting, making it ideal for guiding vertical lifts or heavy tooling without external guides.
Mounts a cam or position flag on the rear rod end to trigger external sensors without interfering with the primary workpiece.
Choose this 63mm bore over the smaller 50mm (825 N) when you need higher symmetric force, or step up to the 80mm (2268 N) for heavier loads. The double-rod design is selected over a single-rod SAI when an application requires dual-side guidance, twin-station actuation, or rear-rod sensing. It supports a speed range of 30-800 mm/s.
This cylinder uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR accessories. Note that the adjustable air cushions only decelerate the piston near stroke end; a plain SAID does not hold its load without live air pressure. For locking needs, consider SAIL or BSAID variants.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers an equal force of 1402 N in both extend and retract directions at 0.5 MPa (1962 N at 0.7 MPa).
Yes, the SAID63X15 is dimensionally interchangeable per ISO 15552 profile cylinder standards. It serves as a direct replacement for other ISO 15552 double-rod cylinders using the same mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.