verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63AX170

The AirTAC SAID63 Double Rod Cylinder SAID63AX170 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke170 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$149.11 $156.61Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63AX170

The AirTAC SAID63X170 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 170mm stroke. Because a piston rod exits both end covers, the annulus area is identical on extend and retract. This yields exactly 1402 N of force in both directions at 0.5 MPa, ensuring perfectly symmetric motion and speed.

This unit utilizes a SUS420J2 stainless steel rod (option A) for superior corrosion resistance and features PT tapered port threading. The extruded aluminum barrel includes sensor grooves on both sides, allowing you to mount a position flag or cam on the rear rod end to trigger secondary mechanisms while driving the primary load up front.

Airtac SAID63 Double Rod Cylinder SAID63AX170 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63AX170
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63AX170

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63AX170 Is Used

sync_alt

Symmetric Force Transfer

Drives workpieces back and forth with identical 1402 N thrust on both strokes, ensuring balanced, predictable motion in automated transfer lines.

view_module

Twin-Station Actuation

Uses the front rod to push a primary workpiece while the rear rod simultaneously operates a secondary mechanism or ejector on the opposite side.

straighten

Anti-Rotation Slides

The dual through-rod configuration prevents piston twisting under offset loads, maintaining precise alignment for precision sliding and clamping tasks.

Is the Airtac SAID63 Double Rod Cylinder SAID63AX170 the Right Cylinder?

Choose this 63mm bore double-rod actuator when an application requires equal push and pull forces alongside anti-rotation stability. If your mechanism needs less force, step down to the 50mm bore (825 N both ways at 0.5 MPa); if you need heavier thrust, the 80mm bore provides 2268 N. The twin-rod design inherently resists torsional loads better than a single-rod SAI, providing dual-side guidance without external guides for this 170mm stroke.

This model uses a PT port thread and accepts the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting the FB, CA, CB, and CR brackets used on single-rod variants). Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not hold a load. If position holding without air pressure is required, select a SAIL or BSAID clamp-lock cylinder.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63AX170 FAQ

Because the double-rod design creates equal annulus areas on both sides of the piston, it provides 1402 N of force in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, the SAID63X170 is dimensionally interchangeable per ISO 15552 profile cylinder standards. It serves as a direct replacement for other ISO 15552 double-rod cylinders, utilizing the same mounting interface.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63AX170

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63AX170 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.