
The AirTAC SAID63 Double Rod Cylinder SAID63AX175 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 175mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X175 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 175mm stroke. Because a piston rod exits both end covers, the annulus area is identical on extend and retract. This means you get perfectly symmetric thrust of 1402 N each way at 0.5 MPa, ensuring balanced speed and force for demanding transfer tasks.
This specific variant is built with an SUS420J2 stainless steel rod (material code A) for superior corrosion resistance compared to standard carbon steel. The extruded aluminum barrel includes sensor grooves on both sides for tracking piston position. Note that a plain double-rod cylinder drifts when air pressure is removed; the adjustable air cushions only decelerate the piston near stroke end and do not function as a lock.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX175 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for shuttling parts between two stations where equal 1402 N push and pull thrust at 0.5 MPa ensures consistent dynamic performance in both travel directions.
The twin through-rods prevent the piston from twisting under offset loads, maintaining precise linear tracking without needing external guide shafts.
The protruding rear rod can simultaneously trigger a mechanical limit switch or drive a secondary mechanism while the front rod performs the primary work.
Choose this 63mm bore when a 50mm bore provides insufficient thrust (825 N at 0.5 MPa) or a 80mm bore (2268 N at 0.5 MPa) is physically oversized for your machine envelope. The twin-rod architecture is selected over a single-rod SAI when an application requires dual-side guidance, high resistance to torsional loads, or a rear rod end to drive a secondary cam or position flag.
When ordering, verify your need for a -S magnet for CMSE reed or DMSE solid-state sensors, the PT tapered port connection, and your mounting accessories. SAID supports a reduced set of ISO 15552 mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). For this 175mm stroke, side-loading is moderate, but always verify rod bearing life if the load is cantilevered.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers 1402 N of force in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.
Yes, it is dimensionally interchangeable per ISO 15552 mounting dimensions. It supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts, making it a direct replacement for standard double-rod profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.