
The AirTAC SAID63 Double Rod Cylinder SAID63AX185 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 185mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X185 is a double-acting, double-rod ISO 15552 profile cylinder configured with a 63mm bore and 185mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding equal force and speed both ways. It delivers 1402 N of thrust and pull at 0.5 MPa, and 1962 N at 0.7 MPa.
This specific configuration features a SUS420J2 stainless steel rod (option A) for superior corrosion resistance and PT tapered port threads. The twin-rod design allows mounting a primary workpiece on one end and a cam, position flag, or secondary mechanism on the rear rod, providing dual-side guidance and enhanced anti-rotation stability compared to a single-rod SAI.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX185 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 185 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×185 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving payloads between two stations where the equal 1402 N extend and retract forces prevent speed discrepancies and ensure smooth, balanced transfer cycles.
The protruding rear rod can drive an independent secondary mechanism or trigger a mechanical cam, utilizing the through-rod design for compact machine integration.
Twin rods exiting both ends provide superior guidance and resist piston twisting, making this cylinder perfect for lifting heavy slides or tooling plates without rotational drift.
Selecting this 63mm bore makes sense when you need the 1402 N both-direction force class, bridging the gap between the 50mm bore (825 N) and the 80mm bore (2268 N). A double-rod is chosen over a single-rod SAI when your mechanism requires symmetric actuation, twin-station operation, or rear-rod position sensing. Note that this 185mm stroke is a non-standard made-to-order length beyond the standard 175mm and 200mm increments.
As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 double-rod cylinders. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets. Note that a plain SAID does not hold its load if air pressure is lost; for locking needs, consider the SAIL or BSAID series. Since the stroke is under 300mm, side-load bending stresses on the rod bearing are moderate, but external guidance is still recommended for heavy radial loads.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes. The SAID63X185 is dimensionally interchangeable per ISO 15552. It supports a specific subset of mounts: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not use the FB, CA, CB, or CR brackets found on single-rod cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.