
The AirTAC SAID63 Double Rod Cylinder SAID63AX190 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X190 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 190mm stroke. Because the piston rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of output force at 0.5 MPa in both extend and retract directions.
This configuration uses a SUS420J2 stainless steel rod (option A) for superior corrosion resistance and features PT tapered port threads (G3/8). The rear rod protrusion allows engineers to mount a secondary cam, position flag, or drive a second mechanism, while providing dual-side guidance to prevent load rotation.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX190 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives a transfer carriage with equal 1402 N force extending and retracting, ensuring consistent cycle times without speed drift.
The dual through-rods guide the payload rigidly, preventing torsional twist on vertical lifting slides.
Uses the rear rod end to trip a mechanical limit valve or carry a target for a secondary mechanism.
Select this 63mm bore when a 50mm bore yields insufficient thrust (825 N at 0.5 MPa) or a 80mm bore is excessive (2268 N at 0.5 MPa). The twin-rod design is chosen over a single-rod SAI when an application demands equal push/pull forces, anti-rotation stability, or rear-rod position sensing.
As a standard double-acting cylinder, it does not hold position if air pressure drops; use a SAIL lock cylinder or external pilot-operated check valve for fail-safe load holding. It is dimensionally interchangeable per ISO 15552 and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts (omitting FB, CA, CB, CR). Since the stroke is 190mm, ensure adequate rear clearance for the through-rod and use an external guide for heavy loads.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It provides 1402 N of force in both directions at 0.5 MPa, and 1962 N at 0.7 MPa.
Yes, the SAID63X190 is dimensionally interchangeable with other ISO 15552 profile cylinders. Just ensure your mounting accessory (Basic, FA, LB, TC, FTC, TCM1, TCM2) and G3/8 port interface match.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.