
The AirTAC SAID63 Double Rod Cylinder SAID63AX20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 20mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X20 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 20mm stroke. Because a rod exits both end covers, the annulus area is identical on extend and retract, yielding a balanced 1402 N output force in both directions at 0.5 MPa. It uses a PT tapered port thread and a durable SUS420J2 stainless steel rod.
This through-rod design allows mounting the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism on the opposite end. The twin-rod architecture provides superior anti-rotation guidance compared to single-rod units, and the extruded aluminum barrel integrates sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX20 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for mechanisms requiring identical push and pull thrust, utilizing the 1402 N both-way capacity to smoothly shuttle loads without speed or force differentials.
The twin-rod architecture prevents the piston from twisting under offset loads, providing precise linear guidance for delicate handling tasks.
The protruding rear rod end can drive a secondary mechanism or cam, allowing one cylinder to sequence two separate machine actions simultaneously.
Choose this 63mm bore double-rod actuator when an application requires equal push and pull forces alongside dual-side guidance. If your mechanism needs less force, step down to the 50mm bore (825 N both ways at 0.5 MPa); if more thrust is required, move up to the 80mm bore (2268 N). Note that a plain SAID does not hold its load when air is lost; for position holding without live pressure, consider the SAIL or BSAID series.
This model is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 double-rod cylinders. It supports the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR variants found on single-rod SAI units. Since no magnet (-S) is specified, it will not work with CMSE or DMSE sensors.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective area is the same on both sides, providing an equal extend and retract force of 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 cylinders, but it only uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits the FB, CA, CB, and CR mounts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.