
The AirTAC SAID63 Double Rod Cylinder SAID63AX20S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 20mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X20-S is a double-acting, double-rod ISO 15552 profile cylinder engineered for applications requiring symmetric dynamics and anti-rotation guidance. Because a rod extends from both end covers, the effective annulus area is identical in both directions, yielding an equal extend and retract force of 1402 N at 0.5 MPa (1962 N at 0.7 MPa). This through-rod architecture allows mounting a primary workpiece on one end while utilizing the rear rod end for a cam, position flag, or secondary mechanism.
Built with a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance, this 63mm bore, 20mm stroke unit includes a magnet for position sensing. It is fully compatible with AirTAC CMSE reed and DMSE electronic solid-state switches mounted into the dual-sided sensor grooves on the extruded aluminum barrel. Fluid supply must be filtered to 40 um, operating within a 0.15-1.0 MPa pressure range.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX20S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pressing or clamping stations where the 1402 N force must be identical in both extend and retract directions, preventing uneven wear on tooling.
The twin-rod configuration provides superior torsional rigidity, keeping the load guided and preventing rotation during short-stroke positioning.
Mount the primary tool on the front rod and use the rear rod extension to trigger a CMSE or DMSE position switch for dual-station actuation.
Select this 63mm bore model when a compact 20mm stroke mechanism requires equal push and pull forces (1402 N each way at 0.5 MPa) and high torsional stability. If your application demands less force, the neighboring 50mm bore provides 825 N both ways at 0.5 MPa; for heavier loads, the 80mm bore offers 2268 N. The double-rod design is chosen over a single-rod SAI when dual-side guidance is needed to prevent rod rotation, or when rear-end sensing is required. This cylinder uses PT tapered port threads (G3/8) and supports mountings Basic, FA, LB, TC, FTC, TCM1, TCM2.
Note that the adjustable air cushions at both ends only decelerate the piston near stroke end; they do not lock or hold the load. If air pressure drops or the valve is centered, the piston will drift. For position holding without live pressure, consider an external pilot-operated check valve, the SAIL lock variant, or the BSAID double-rod clamp-lock. This SAID unit is dimensionally interchangeable per ISO 15552 for direct replacement.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the effective piston area is the same on both sides. It outputs 1402 N in both extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa.
No, the adjustable air cushions only decelerate the piston at stroke end and do not act as a lock. The piston will drift if pressure is lost or the valve is centered. Use a SAIL or BSAID variant for secure load holding.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.