
The AirTAC SAID63 Double Rod Cylinder SAID63AX220 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 220mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X220 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 220mm stroke. Because a rod extends from both end covers, the annulus area is identical in both directions, yielding exactly 1402 N of force at 0.5 MPa on extend and retract. The rear rod end is perfect for mounting a position flag or driving a secondary mechanism.
This unit uses a SUS420J2 stainless steel rod (material code A) for superior corrosion resistance and features adjustable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, allowing easy installation of CMSE reed or DMSE electronic switches if a magnet is added later.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX220 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides identical 1402 N thrust in both directions, ensuring perfectly balanced movements for pressing and transferring parts without speed fluctuations.
The twin-rod architecture prevents mechanical twisting under offset loads, keeping precision slides and grippers perfectly aligned throughout the stroke.
The protruding rear rod offers a dedicated mounting point for a cam or DMSE electronic sensor flag, keeping position feedback isolated from the primary work tool.
Select this 63mm bore model when your application requires equal push and pull forces (1402 N at 0.5 MPa) and enhanced anti-rotation guidance. If your mechanism needs less force, step down to the 50mm bore (825 N); if you need more thrust, step up to the 80mm bore (2268 N). The double-rod design is preferred over a single-rod SAI when a secondary cam or limit flag must exit the rear, or when the load must be guided against twist.
This cylinder uses a PT G3/8 port and shares the ISO 15552 mounting interface, making it a direct replacement for other standard profile cylinders. Available mountings include Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting single-rod variants like FB and CA). Since the 220mm stroke exceeds 300mm is not met, standard bearing loads apply, but always verify side loads. Note that this cylinder does not hold position unpowered; use a SAIL or BSAID if locking is required.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes. The SAID63X220 is dimensionally interchangeable per ISO 15552. It shares the same 63mm bore, 220mm stroke, and G3/8 port interface, though you must ensure your mounting accessory is from the SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.