
The AirTAC SAID63 Double Rod Cylinder SAID63AX260S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 260mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X260-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 260mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. It includes a piston magnet (-S) for position sensing and uses SUS420J2 stainless steel rods for enhanced corrosion resistance.
This model features PT tapered port threads and adjustable air cushions at both ends (36 mm cushion stroke). The extruded aluminum barrel includes sensor grooves on both sides, accepting AirTAC CMSE reed and DMSE electronic solid-state switches. A rod protruding from the rear cover allows for dual-side guidance, anti-rotation control, or mounting a secondary cam and position flag.
| Model | Airtac SAID63 Double Rod Cylinder SAID63AX260S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for transferring parts where the 1402 N push and pull forces must be perfectly balanced to maintain precise timing on a 260mm stroke.
The twin 20mm SUS420J2 rods keep the load guided and prevent rotation without needing external linear bearings.
The rear rod end drives a secondary cam or DMSE sensor flag, allowing dual-side mechanism control and end-of-stroke confirmation.
Choose this 63mm bore double-rod cylinder when an application requires equal push and pull forces alongside anti-rotation stability. Stepping up to the 80mm bore yields 2268 N both ways, while dropping to the 50mm bore provides 825 N. A plain SAID does not hold its load when air is lost; for position holding without live pressure, select the SAIL (air-released lock) or BSAID (clamp-lock) series.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 double-rod cylinders. It uses the reduced SAID mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and omits FB, CA, CB, and CR. For this 260mm stroke, the 20mm rod and M16x1.5 thread handle moderate side loads, but an external guide is recommended if carrying heavy off-center loads.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
It delivers 1402 N of force in both the extend and retract directions at 0.5 MPa, and 1962 N at 0.7 MPa. Because it is a double-rod cylinder, the effective area is the same both ways.
Yes, the SAID63X260-S is dimensionally interchangeable per ISO 15552 and uses a standard mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), allowing it to serve as a direct replacement.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.