
The AirTAC SAID63 Double Rod Cylinder SAID63X105S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 105mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X105-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a piston magnet for position sensing. Because a carbon steel rod exits both end covers, the annulus area is identical on both sides. This yields perfectly symmetric dynamics, delivering 1402 N of output force in both extend and retract directions at 0.5 MPa.
The twin-rod architecture allows you to mount the primary workpiece on one end and attach a cam, secondary tool, or limit flag on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state switches, ensuring flexible mounting for dual-side tracking.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X105S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 105 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×105 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for moving loads between two stations where the 1402 N force and transit speed must remain identical in both directions.
Mount the primary workpiece on the front rod and a secondary cam or forming tool on the rear rod to operate parallel mechanisms simultaneously.
The twin carbon steel rods prevent piston twisting under offset loads, providing stable linear motion for precision sliding fixtures.
Choose this 63 mm bore when an application demands equal push and pull forces alongside superior anti-rotation guidance. If your project requires less force, stepping down to the 50 mm bore yields 825 N each way at 0.5 MPa. For heavier loads, the 80 mm bore provides 2268 N symmetrically. The PT tapered port thread matches the standard G3/8 interface for this bore size.
As a double-rod variant, the SAID omits the FB, CA, CB, and CR mounts, utilizing a reduced ISO 15552 accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable air cushions only decelerate the piston near stroke end; they do not hold a load. If position holding is required without live air pressure, consider an external rod lock or the related SAIL series.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, the SAID63X105-S is dimensionally interchangeable per ISO 15552. It uses the standard 63 mm mounting interface and accepts Basic, FA, LB, TC, FTC, TCM1, and TCM2 accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.