verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X10S

The AirTAC SAID63 Double Rod Cylinder SAID63X10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 10mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke10 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$97.93 $105.43Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X10S

The AirTAC SAID63X10-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 10mm non-standard stroke. Because a carbon steel rod exits both end covers, the annulus area is identical on both sides, yielding equal push and pull forces of 1402 N at 0.5 MPa. This through-rod design is highly effective for short-stroke transfer applications requiring precise anti-rotation guidance.

Equipped with a magnet for position sensing, this model supports AirTAC CMSE reed and DMSE electronic switches along its dual-side sensor grooves. The integrated adjustable air cushions at both ends decelerate the piston near stroke end, but note that this cylinder does not hold its load pneumatically when air pressure is lost. For applications requiring position holding without live pressure, consider the SAIL or BSAID variants.

Airtac SAID63 Double Rod Cylinder SAID63X10S Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X10S
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke10 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X10S

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×10Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X10S Is Used

sync_alt

Symmetric Force Transfer

Ideal for short-stroke part transfer where equal extend and retract forces ensure consistent clamping and release without momentum drift.

straighten

Anti-Rotation Slides

The twin through-rods prevent the load from twisting during vertical or horizontal slides, maintaining strict guidance over the 10mm travel.

settings_input_component

Dual-Side Actuation

Drive a primary workpiece on the front rod end while using the rear protrusion to trigger a CMSE/DMSE sensor or operate a secondary mechanism.

Is the Airtac SAID63 Double Rod Cylinder SAID63X10S the Right Cylinder?

Select this specific 10mm stroke variant when a compact, short-stroke motion is required with symmetric force and high torsional rigidity. If your mechanism needs slightly less force, stepping down to the 50mm bore yields 825 N both ways at 0.5 MPa. Conversely, moving up to the 80mm bore provides 2268 N. The 20mm rod diameter and M16x1.5 thread provide robust side-load capacity for short strokes, though long unsupported strokes would require an external guide.

Choose the SAID double-rod over a single-rod SAI when you need to mount a secondary cam, position flag, or tool on the rear rod extension. This model is dimensionally interchangeable per ISO 15552 and uses a reduced mounting accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting the FB, CA, CB, and CR brackets. It features PT tapered port threads and operates at speeds between 30-800 mm/s.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X10S FAQ

Because it is a double-rod cylinder, the effective area is the same on both sides. It delivers an equal push and pull force of 1402 N at 0.5 MPa, and 1962 N at 0.7 MPa.

Yes, the SAID63X10-S is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a standard 63mm bore footprint and a G3/8 port, making it a direct replacement for matching ISO 15552 double-rod designs.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X10S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X10S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.