
The AirTAC SAID63 Double Rod Cylinder SAID63X110 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 110mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X110 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 110mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding a perfectly symmetric 1402N force at 0.5MPa in either direction. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches.
This through-rod architecture lets you attach the primary workpiece to one end while using the rear rod end for external guidance, a position flag, or a secondary cam. Operating pressure spans 0.15-1.0MPa, and adjustable air cushions at both ends decelerate the piston smoothly near stroke limits.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X110 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives loads with equal push and pull force, ensuring stable horizontal transfer without speed fluctuations between stroke directions.
The twin-rod configuration prevents piston rotation, making it ideal for lifting guided vertical stages or moving precision jigs.
Mount a primary tool on the front rod end and a secondary cam or position flag on the rear protruding rod to sequence two operations.
Choose this 63mm bore when an application requires balanced push and pull forces alongside superior anti-rotation resistance. If your project needs less force, stepping down to the 50mm bore drops the both-way output to 825N at 0.5MPa, while moving up to an 80mm bore increases it to 2268N. The double-rod design is specifically preferred over a single-rod SAI when you need to drive twin stations or maintain strict lateral stability. Note that a plain SAID does not hold a load safely upon air loss; for position holding without live pressure, consider an external pilot-operated check valve or the SAIL lock variant.
When ordering, verify the 110mm stroke, G3/8 PT port, and appropriate mounting accessories from the reduced SAID set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Dimensionally interchangeable per ISO 15552, it serves as a direct replacement for other standard double-rod profile cylinders.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the annulus area is the same on both sides, providing an equal extend and retract force of 1402N at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa.
Yes, the SAID63X110 is dimensionally interchangeable per ISO 15552 and serves as a direct replacement for other standard profile double-rod cylinders, utilizing a G3/8 port and a 20mm rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.