verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X135

The AirTAC SAID63 Double Rod Cylinder SAID63X135 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 135mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke135 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$108.16 $115.66Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X135

The AirTAC SAID63X135 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 135mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding an equal 1402 N of force in each direction at 0.5 MPa. This through-rod architecture provides superior anti-rotation guidance for external loads compared to a single-rod SAI.

The twin-rod design allows you to mount the primary workpiece on the front rod end while utilizing the rear rod end to drive a secondary mechanism, mount a position flag, or actuate a cam. The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE or DMSE switches, though this specific configuration omits the -S magnet. It uses a PT tapered G3/8 port and adjustable air cushions at both ends to decelerate the piston near stroke limits.

Airtac SAID63 Double Rod Cylinder SAID63X135 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X135
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke135 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X135

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×135Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X135 Is Used

sync_alt

Symmetric Force Transfer

Drives shuttles or indexing mechanisms where the equal 1402 N extend and retract forces prevent speed variations between strokes.

straighten

Anti-Rotation Slides

The twin through-rods keep guided loads from twisting under offset moments, ensuring precise linear movement without external guides.

settings_input_component

Rear-End Sensing

Mounts a cam or physical limit flag on the rear rod end to trigger external mechanical switches away from the primary work area.

Is the Airtac SAID63 Double Rod Cylinder SAID63X135 the Right Cylinder?

Choose this 63mm bore when an application requires balanced bidirectional force and high torsional resistance. If your mechanism needs less push/pull force, stepping down to the 50mm bore yields 825 N both ways at 0.5 MPa; if higher thrust is required, the 80mm bore provides 2268 N. The 135mm stroke is a non-standard made-to-order length, meaning the overall cylinder length will differ from standard catalog strokes and requires extra rear-rod clearance for the protruding through-rod.

When selecting mounting accessories, note that SAID supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 interfaces, deliberately omitting the FB, CA, CB, and CR styles found on single-rod variants. This cylinder is dimensionally interchangeable per ISO 15552 standards. Remember that a plain SAID does not hold its position or load when air pressure is lost or exhausted; the piston will drift. For dead-load holding without live pressure, consider the SAIL (lock), BSAID (clamp-lock), or an external pilot-operated check valve.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X135 FAQ

Because the double-rod design occupies piston area on both sides, the effective area is equal in both directions. The output force is 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa for both extend and retract strokes.

Yes, the SAID63X135 is dimensionally interchangeable with other ISO 15552 profile cylinders. It shares the standard 63mm bore mounting interface and uses a G3/8 port, making it a direct replacement for standard ISO 15552 double-rod footprints.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X135

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X135 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.