
The AirTAC SAID63 Double Rod Cylinder SAID63X155 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 155mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X155 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 155mm stroke. Because a rod extends from both end covers, the annulus area is identical on both sides, yielding exactly 1402 N of force in both extend and retract directions at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This through-rod design allows you to mount the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism to the rear rod. It provides superior anti-rotation guidance compared to a single-rod SAI. The standard carbon steel rod and PT threaded ports ensure robust, leak-free pneumatic performance.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X155 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives shuttle mechanisms where equal push and pull momentum is required, ensuring stable motion without asymmetric acceleration.
Guides heavy vertical lifts or pressing tools, using the twin-rod architecture to prevent mechanical binding and rotational drift.
Mounts a physical limit flag on the rear rod to trigger external mechanical switches safely away from the primary work area.
Choose this 63mm bore when your application requires balanced bidirectional force and higher side-load resistance than smaller variants. If you need less force, the 50mm neighbor provides 825 N each way at 0.5 MPa. Since this is a 155mm stroke, it falls within standard lengths, but always ensure adequate rear-rod clearance for the protruding shaft.
A plain SAID does not hold its load when air pressure is lost or exhausted; the piston will drift. If your mechanism requires position holding without live pressure, consider the SAIL (pneumatic lock) or BSAID (clamp-lock) variants. This cylinder is dimensionally interchangeable per ISO 15552 and uses the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, TCM2.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design occupies area on both sides of the piston, the force is equal in both directions. It delivers 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, it is dimensionally interchangeable with ISO 15552 profile cylinders. It supports a specific mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, but omits FB, CA, CB, and CR.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.