verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID63 Double Rod Cylinder SAID63X170

The AirTAC SAID63 Double Rod Cylinder SAID63X170 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 170mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ63 mm
  • Stroke170 mm
  • Port sizeG3/8
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 36 mm
$111.42 $118.92Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID63 stroke, mounting and version on one page All SAID63 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID63 Double Rod Cylinder SAID63X170

The AirTAC SAID63X170 is a double-acting, double-rod ISO 15552 profile cylinder featuring a non-standard 170mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding a perfectly symmetrical 1402N of force in either direction at 0.5 MPa. This through-rod architecture provides superior anti-rotation guidance and allows a secondary mechanism or position flag to be mounted on the rear rod end.

The extruded aluminum barrel includes sensor grooves on both sides for flexible mounting of CMSE reed or DMSE electronic switches. It shares the exact ISO 15552 mounting interface of the standard SAI series but utilizes a reduced accessory set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets. Adjustable air cushions at both ends decelerate the piston smoothly, though the cylinder will drift if air pressure is lost and requires an external rod lock for true load holding.

Airtac SAID63 Double Rod Cylinder SAID63X170 Technical Specifications

ModelAirtac SAID63 Double Rod Cylinder SAID63X170
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ63 mm
Stroke170 mm
Acting typeDouble acting
Port sizeG3/8
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø63mm)

PressurePush forcePull force
0.5 MPa1402 N1402 N
0.7 MPa1962 N—
Max (@1.0 MPa)286 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID63 Double Rod Cylinder SAID63X170

SAIISO 15552 profile-barrel cylinder series.
63Bore size in mm.
×170Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID63 Double Rod Cylinder SAID63X170 Is Used

sync_alt

Symmetric Force Transfer

Ideal for pressing or transferring loads where the 1402N push and pull forces must be perfectly balanced without speed fluctuations between stroke directions.

straighten

Anti-Rotation Slides

The dual carbon steel rods prevent piston rotation, providing precise linear guidance for heavy sliding mechanisms that require high torsional resistance.

settings_input_component

Rear-Rod Cam Actuation

The protruding rear rod end can independently drive a secondary mechanism or trigger a position flag while the front rod executes the primary work stroke.

Is the Airtac SAID63 Double Rod Cylinder SAID63X170 the Right Cylinder?

Choose this non-standard 170mm stroke when a 160mm or 175mm standard option does not fit your specific dual-station actuation or through-rod sensing requirements. If you need less force, stepping down to the 50mm bore offers 825N both ways, while stepping up to the 80mm bore provides 2268N. The twin-rod design is selected over a single-rod SAI when the application demands equal push/pull speeds, dual-side guidance, or a rear-rod cam drive. To match this cylinder, specify the 63mm bore, 170mm stroke, PT G3/8 port, and your preferred mounting bracket. As the stroke is 170mm, the overall length is longer than a standard SAI due to the rear rod protruding both ends, so ensure you have adequate rear clearance in your machine design.

AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID63 Double Rod Cylinder SAID63X170 FAQ

Because the double-rod design subtracts the rod area from both sides of the piston, the force is equal in both directions. It provides 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa.

It is dimensionally interchangeable with ISO 15552 profile cylinders, but the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It does not support the FB, CA, CB, or CR brackets found on single-rod cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID63 Double Rod Cylinder SAID63X170

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID63X170 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.