
The AirTAC SAID63 Double Rod Cylinder SAID63X190 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 190mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X190 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and a 190mm made-to-order stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding a balanced 1402N output both ways at 0.5MPa. The unit integrates adjustable air cushions at both ends and utilizes a PT G3/8 porting interface.
This through-rod architecture allows you to mount the primary workpiece on one end while attaching a position flag, cam, or secondary mechanism on the rear rod. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement, and the overall length requires extra rear clearance to accommodate the protruding rod.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X190 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives mechanisms where exact bidirectional force and speed are critical, ensuring the 1402N push matches the pull perfectly for stable cycle times.
Utilizes the twin-rod guidance to prevent the load from twisting during vertical or horizontal transfer, replacing bulky external guide rails.
Mounts a physical trigger flag on the rear protruding rod to actuate external mechanical switches safely away from the primary work area.
Choose this 63mm bore when an application demands equal push and pull forces alongside strict anti-rotation guidance, which a single-rod SAI cannot provide. If your project requires less force, stepping down to the 50mm bore yields 825N both ways at 0.5MPa; conversely, the 80mm bore provides 2268N for heavier loads. As a 190mm stroke is non-standard, expect a made-to-order lead time.
To ensure direct compatibility, match your existing ISO 15552 bore, 190mm stroke, PT G3/8 port, and mounting accessory. Supported SAID mounts include Basic, FA, LB, TC, FTC, TCM1, and TCM2. Note that a plain SAID relies on live air pressure to hold position; if power fails, the piston drifts. For dead-load holding, consider the SAIL or BSAID series. Because the stroke is under 300mm, side-load bending risks are moderate, but external guides are still recommended for heavy lateral loads.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area from both sides of the piston, the extend and retract forces are equal. It generates 1402N both ways at 0.5MPa, 1962N at 0.7MPa, and 2523N at 0.9MPa.
Yes. The SAID63X190 is dimensionally interchangeable with other ISO 15552 profile cylinders based on bore, stroke, and mounting interface dimensions. It is a direct replacement, provided you account for the extra rear clearance needed for the second rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.