
The AirTAC SAID63 Double Rod Cylinder SAID63X220 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 220mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X220 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 220mm stroke. Because a carbon steel rod exits both ends, the annulus area is identical on extend and retract, yielding an equal force of 1402 N each way at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch mounting.
This through-rod design allows you to mount the primary workpiece on one end while attaching a cam, position flag, or secondary mechanism on the rear rod. It provides superior anti-rotation guidance compared to a single-rod SAI. The standard PT tapered porting is G3/8, and adjustable air cushions at both ends decelerate the piston over 36 mm.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X220 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pushing and pulling loads where equal 1402 N force and speed are required in both directions without drift.
Drives two separate mechanisms simultaneously using the front and rear rod ends for synchronized multi-axis tasks.
The dual-rod geometry prevents piston rotation, ensuring highly precise linear guidance for rigid tooling.
Choose this 63mm bore when an application requires symmetric push and pull forces alongside dual-side guidance. If your project needs less force, stepping down to the 50mm bore yields 825 N both ways at 0.5 MPa; stepping up to the 80mm bore provides 2268 N. A double-rod configuration is preferred over a single-rod SAI when you need to drive twin stations or prevent load rotation.
This cylinder uses a G3/8 PT port and accepts the reduced SAID mounting set: Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR). It is dimensionally interchangeable per ISO 15552. Since the stroke is 220mm, external side-load guidance is recommended to protect the rod bearings. Note that a plain SAID does not hold its load without live air pressure; for locking needs, consider SAIL or BSAID types.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because the double-rod design subtracts the rod area on both sides, the extend and retract forces are equal. It provides 1402 N each way at 0.5 MPa, 1962 N at 0.7 MPa, and 2523 N at 0.9 MPa.
Yes, the SAID63X220 is dimensionally interchangeable with other ISO 15552 profile cylinders. It uses standard mounting dimensions and a G3/8 port, though you must ensure rear rod clearance for the through-rod.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.