
The AirTAC SAID63 Double Rod Cylinder SAID63X230 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø63mm bore and 230mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID63X230 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 63mm bore and 230mm stroke. Because a carbon steel rod exits both end covers, the effective piston area is identical on extend and retract, yielding equal force and speed in both directions. This configuration outputs 1402N each way at 0.5 MPa and operates between 30-800 mm/s.
The twin-rod architecture allows you to mount the primary workpiece on the front rod and a position flag or cam on the rear rod for external tracking. It features adjustable air cushioning at both ends to decelerate the piston smoothly, and the extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID63 Double Rod Cylinder SAID63X230 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø63 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | — |
| Max (@1.0 MPa) | 286 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Drives loads with identical push and pull thrust, ensuring consistent performance where the return stroke does equal work to the extension.
Uses the dual-rod geometry to guide vertical or horizontal slides, preventing piston rotation without external linear bearings.
Mounts a physical cam or target on the rear rod end to trigger external proximity sensors in space-constrained front zones.
Select this 63mm bore when an application requires balanced bidirectional force, stepping up from a 50mm bore (825N at 0.5 MPa) or down from an 80mm bore (2268N at 0.5 MPa). A double-rod design is preferred over a single-rod SAI when you need dual-side guidance to prevent rotation or want to drive a secondary mechanism from the rear. For direct compatibility, match the 63mm bore, 230mm stroke, PT G3/8 port, and mounting accessory (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
At 230mm of travel, the unsupported rod length increases; use an external guide to prevent rod-bearing bending under heavy side loads. Note that the adjustable air cushions only decelerate the piston near stroke end and do not hold the load if air pressure is lost. For position holding without live pressure, consider a SAIL lock cylinder or an external pilot-operated check valve.
AirtacDistr lists every SAID63 order code with its price on one page at https://airtacdistr.com/products/airtac-said63-double-rod-iso-cylinder
Quick checklist
Because it is a double-rod cylinder, the force is equal in both directions. It provides 1402N at 0.5 MPa, 1962N at 0.7 MPa, and 2523N at 0.9 MPa for both extension and retraction.
Yes, the SAID63X230 is dimensionally interchangeable per ISO 15552. You can drop it in for other ISO 15552 double-rod cylinders by matching the 63mm bore, 230mm stroke, G3/8 port, and standard mounting accessories.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.